Nippon Tanshi connector

K77 (board to wire)

Board to wire 1.25mm pitch (SMT) connector. Features: Thin low insertion and extraction force connector with external lock structure; Protective structure for contact parts using boxed sockets; Socket anti reverse insertion structure.

K89 (for line to line)

Wire to wire 2.0mm spacing relay connector. Features: Inertial lock structure prevents incomplete fit; Each color corresponds to a key control structure to prevent mismatches between different colors; There is a flat surface on the mother shell that can be mechanically pushed* MSF cover plate can also be set (optional); Anti breakage lock and anti misoperation lock structure; The female terminal is shared with the PCB (K89 series).

48 (device to line)

. 187 (4.8mm) sturdy locking connector for connecting equipment. Features: Will not detach due to external forces on the wire; Simply pull out the casing to easily separate it from the label.

73 (for direct board installation)

2.0 mm spacing R-type board input connector for direct board installation. Feature: A right angled multi pin board in connector used to pull out leads horizontally from the board. Adopting a shell spray gun method for easy insertion into the shell. Due to preventing the tip of the contact from loosening, it is easy to install on a printed circuit board.