Kyocera connectors

Board to board connector

Two piece connectors and independent contacts provide multiple packaging solutions for vertical, parallel, and coplanar applications. Features include ultra small spacing, low stack height, and a wide range of pin counts. A one-piece card edge, compression connector, and separate contacts can be used to meet various signal and power requirements.

Contact connector

These connectors are single contact and offer all the advantages of a complete connector solution without the need for additional components and assembly costs associated with plastic insulators. Even in harsh industrial environments, contacts do not need to be encapsulated in plastic casings. The exposed contacts are no different from the exposed solder pads on the PCB. KYOCERAAVX's connectors are designed to meet customers' requirements for cost-effective board to board and wire to board connector solutions that help simplify designs and save circuit board space while maintaining the robustness, reliability, and repairability of existing connector solutions.

Wire to board connector

Innovative contact solutions continue to drive new technology connectors that connect discrete wires to PCBs. The most innovative solution over the years has been the development of single touch technology. These low-cost solutions are developed specifically for operation without insulation, providing all the performance and functionality of a complete connector system.

Wire to wire connector

These connectors are based on industry validated IDC, crimping, and Poke Home contact technologies. Some typical features include locking, waterproof sealing, and branch and junction box connections.

Single Pair Ethernet (SPE) IP20 connector

With the continuous growth of the industrial Ethernet market, the market continues to search for smaller and faster connectors to meet their needs. Conversely, this has also pushed single pair Ethernet to the forefront of discussion. Single Pair Ethernet (SPE) describes the transmission of Ethernet through only one pair of twisted pair copper wires. In addition to data transmission through Ethernet, SPE can also provide power to terminal devices simultaneously through PoDL (Data Line Power). Previously, this required two pairs of Fast Ethernet (100MB) and four pairs of Gigabit Ethernet. In addition to saving space and weight, SPE only transmits 1GBit/s within a distance of 40 meters. KYOCERAAVX is part of the SPE Industrial Partner Network and will provide SPE products to meet customer and market demands, while also complying with standards such as IEC63171-6 and IEEE802.3.

RF Connector 

The new 6791 series coaxial cable to board connector aims to simplify the connection process and achieve simple termination with just one press. Expanding the proven and reliable IDC (Insulated Displacement Connector) from signal/power transmission to high-frequency transmission up to 6GHz, the IDC contacts pierce the sheath and insulation layer of the cable and make direct contact with the twisted wires and conductors of the wires. At the same time. Compared with direct welding, welding quality no longer depends on the skills of operators, making it difficult to unify and control. Manual welding is not currently preferred/allowed in the automotive industry. Compared to expensive traditional two-piece solutions (typically above 10 millimeters), the new 6791 series offers a cost-effective solution with a board height of less than 5 millimeters after capping.

Flexible Printed Circuit Connector (FPC)

The FPC/PFC connectors manufactured by Kyocera AVX are narrow pitch, thin connectors that help save space and are most suitable for compact telecommunications equipment that requires high-speed data transmission, as well as multiple product types with convenient one click locking function (flip lock), sliding ZIF or inexpensive non ZIF type connectors.

Fine pitch connector

Kyocera AVX offers a variety of FinePitch Board to Board connectors ranging from 0.35mm narrow pitch, thin, and space saving types, which are most suitable for compact devices such as smartphones and wearable devices. They have a floating structure that absorbs vibrations and small misalignment on printed circuit boards, making them ideal for applications such as automotive and medical equipment that require high contact reliability.

Shielding lock

The 8069 series is a small terminal called ShieldLocks, used to secure shielding boxes used inside digital media. The use of shielding locks simplifies the installation of shielding boxes by allowing one click operation, which is usually done through manual welding. In addition, ShieldLock has a detachable structure, greatly improving the operability of component replacement and maintenance of the shielding box. Features and advantages: Corresponding to 0.2mm shielding shell. ShieldLocks adopt a structure with springs on both sides to firmly connect and fix the shielding box; Contact material: copper alloy; Working temperature range: -30 to+80 ° C.